Internet Configuration > MTNL PPPoE
MTNL PPPoE Configuration
You can configure
GLB-502T for MTNL broadband by doing the following steps:-
Step 1 : Log into the web configuration of the router by typing the IP address
http://192.168.1.1 in the address bar of Internet Explorer.
A prompt for user name and password should appear. Type 'admin' as username and password both and click on login. You should see the Home page as shown below.
Step 2 : Click on setup and then New Connection tab. Configure the modem as per
the values given below:
1. Give any name is the 'Name' option.
2. Select Type as PPPoE.
3. username = MTNL telephone number
password = CA number mentioned in the telephone bill.
4. VPI = 0
VCI = 32
Rest all would be default settings. Click on Apply and OK.
Step 3 : To save settings properly on the router, click on 'Tools' and 'System
Commands' and then click on 'Save All'. Once settings are saved we need to
reboot router so click on 'Restart' tab just below to 'Save All' tab and let the
router reboot.
Step 4 : Now check for the connection status in Status > Connection Status. It
should show connected with a valid WAN IP address something like 59.x.x.x.
If the PPPoE light on router is on, it means router is connected to internet.
Close the web configuration and try opening any website in your computer.